XT-4860G Series

XT-4800 Series

XT-4860G Specification Highlights

  • 3G UMTS/HSDPA class A multi-slot
  • 3G Bands 800/850/900/1700/1900/2100 MHz
  • Integrated GPS receiver for tracking appli-cations
  • Supports SMS, TCP, UDP and FTP
  • Over-the-air application firmware upgrade
  • 8 pin connector with optional I/O for
    tem-perature sensing
  • Configurable, periodic reporting to extend battery charge
  • AGPS enabled
  • 16 MB Flash memory, optional 64 MB
  • 6.6 Ah Lithium-Ion battery

Tracking of High-Value Assets, Containers & Trailers

XT-4860G is an energy harvesting global multi-band 3G platform supporting long term, remote deployments without the need to replace the self-charging battery. XT-4860G utilizes various sources of kinetic energy, maximizing the battery life of an internal 6.6Ah Lithium-Ion battery. Customers who require frequent data for location, health and monitoring of their remote assets can be assured that XT-4860G communicating on the ubiquitous 3G network will provide more frequent data for longer periods compared to other asset tracking devices in the market today.

Designed to withstand various environmental factors, the XT-4860G is IP67 certified. With a fully sealed, protective case the device can be deployed in marine and desert environments.

Optional Zigbee® transceiver along with multiple inputs allow for interface with various sensors to further enhance the applications where XT-4860G can be utilized.

Optional Features

  • Accelerometer
  • Motion Detection
  • Zibee®

Cellular Specifications

3G UMTS/HSDPA/HSUPA Characteristics
Class A User Equipment
UTRA FDD
3GPP Release 6 HSPA
Six-band Support
- Band I–2100MHz     - Band IV–1700 MHz
- Band II–1900MHz    - Band V–850 MHz
- Band II–1800MHz    - Band VIII–900 MHz
PS (Packet Switched) Data Rate
- HSUPA category 6, up to 5.76 Mb/s UL
- HSDPA category 8, up to 7.2 Mb/s DL
- WCDMA PS data up to 384 kb/s DL / UL
WCDMA/HSDPA/HSUPA Power Class 3
CS (Circuit Switched) Data Rate
- WCDMA CS data up to 64 kb/s DL / U

Mechanical

Case Material ABS plastic, IP67 rated
Dimensions ~ 7.6” X 4.7” X 1.4”
~ 19.3 X 11.9 X 3.5 cm
Weight < ~ 18 oz.
Operating Temp. -30°C to +70°C
Storage Temp. -40°C to +80°C

Certifications

IC
FTCRB
AT&T Network

Physical Connection

I/O’s
- 8 pin micro-fit connector
- 2 digital inputs, 1 ADC, UART, 1 output,
Optional 1-Wire Bus

GPS Specifications

Receiver 50 Channels
Receiver Tracking Sensitivity -162 dBm
Accuracy +/- 2.5m CEP
Cold Start < 33 sec
Hot Start < 1 sec

Power Requirement

Input Voltage 6 – 24 V